Ali flying his 50% Scale Cub at Wings and Wheels 2009

James Morris flying his Pitts Challenger

The beautiful airplane was designed in partnership with Dualsky China and Dualsky USA! The nationally renowned IMAC flyer and Dualsky Production manager designed the precision aircraft while the US team did the graphics! Together a wonderful aircraft was put into production!

The Dualsky Extra 260 has a 54" wing with large control surfaces for extreme 3D flight! This plane will weigh in around 4-4.5 lbs with the recommended setup. This plane uses actual Monokote, not cheap imitation covering!

A very useful video for anybody considering a Weatronic Receiver. This 30 minute video features Ali Machinchy talking about the main features of the unit, as well as software screenshots and examples of the benefits of these units.

Due to the size of the video, we have two versions:

Medium Res (50meg)
High Res (100meg)

Click Here for More Information On the Product

An inexpensive way to join the Jet Set. Made from tough and durable model foam finished in white. Designed for twin ducted fans.
Stand out from the crowd and be the envy of the flying field.
Includes Oleos.

Please be aware that this model is designed for the experienced modeller and pilot. It will require additional items to and some building knowledge to finish.

Click Here for More Information On the Product

Virtually ready to fly out of the box. Takes minutes to assemble.Just add 8 x AA Batteries for the transmitter, charge the flight pack and fly.
Tough foam construction.
Flying Time on fully charged battery approx 15-30mins
Supplied complete with 35Mhz radio,Li-Po batteries and charger.

Click Here for More Information On the Product

Virtually ready to fly out of the box. Takes minutes to assemble.Just add 8 x AA Batteries for the transmitter, charge the flight pack and fly.
Twin Motors and twin boom.Tough foam construction.
Flying Time on fully charged battery approx 12mins
Supplied complete with 35Mhz radio,Li-Po batteries and charger.

Click Here for More Information On the Product

RoboCopter is a superb 2ch indoor Digital Radio Controlled ("Not Infra Red") Micro Helicopter on 2.4 GHz that looks like a Robot.

Weighing in at only 12.5gm's this superb Micro Heli uses advanced electronic mixing and model style fly bar system to deliver its incredibly smooth, stable, realistic flight performance. It also features electronic audible flight trims and onboard transmitter charging for ease of use, achieving 7~8 minute flights from a 20 minute charge.

There may be other indoor helicopters around but none has the smooth, stable flight characteristics or precision control of Yuneec's RoboCopter - or its looks either

Click Here for More Information On the Product

Precision Aerobatics’ mission is not only to produce better and better aircrafts. For us, it is just as important to assist and inspire our customers to become better and better flyers. How many times have you watched the videos on our website and thought “yeah right! Maybe when an expert is holding the sticks, but I’ll never be able to do that!”

3D is challenging and is fun, and with the right aircraft it is within the grasp of anyone regardless of experience or skill level!
PA brings you a new aerodynamic design with a huge wing area 485 sq.in and amazing flying weight of only 750g (26.5oz). The Addiction is predictable and stable, features exceptional stall and slow speed handling characteristics, quick recovery and robustness - allowing any modeller to fly hardcore 3D with ease, inches off the ground.

Click Here for More Information On the Product

With a lot of experience and many hours of design invested in this model, we proudly present the NEW GENERATION of profile 3D Funfly! State-of-the-art design and construction with all the goodies that you ever dreamed of: BAD BOY V2!

V2 is a completely new design with a larger wing area and wingspan, longer fuselage, larger rudder much stronger construction but still extremely light weight!

As all with our models we make sure you can assemble it in minimum time. You can have the Bad Boy in the air in no time! This is a true ARF.

Click Here for More Information On the Product

With a lot of experience and many hours of design invested in this model, we proudly present the NEW GENERATION of profile 3D Funfly! State-of-the-art design and construction with all the goodies that you ever dreamed of: BAD BOY V2!

V2 is a completely new design with a larger wing area and wingspan, longer fuselage, larger rudder much stronger construction but still extremely light weight!

As all with our models we make sure you can assemble it in minimum time. You can have the Bad Boy in the air in no time! This is a true ARF.

Click Here for More Information On the Product

With a lot of experience and many hours of design invested in this model, we proudly present the NEW GENERATION of profile 3D Funfly! State-of-the-art design and construction with all the goodies that you ever dreamed of: BAD BOY V2!

V2 is a completely new design with a larger wing area and wingspan, longer fuselage, larger rudder much stronger construction but still extremely light weight!

As all with our models we make sure you can assemble it in minimum time. You can have the Bad Boy in the air in no time! This is a true ARF.

Click Here for More Information On the Product

With a lot of experience and many hours of design invested in this model, we proudly present the NEW GENERATION of profile 3D Funfly! State-of-the-art design and construction with all the goodies that you ever dreamed of: BAD BOY V2!

V2 is a completely new design with a larger wing area and wingspan, longer fuselage, larger rudder much stronger construction but still extremely light weight!

As all with our models we make sure you can assemble it in minimum time. You can have the Bad Boy in the air in no time! This is a true ARF.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

We offer top quality laser cut constructions and materials (imported balsa and ply, Ultracoat covering) and sophisticated design –  and this is what makes you plane fly like a real pro! PA EDGE 540T designed for IMAC and 3D type aerobatics, as well as sport and pattern flying. It is definitely the perfect choice for your first giant airplane – 84” wingspan is the ideal size to begin with (not over size and easy transportation), yet it gives you the pleasure of flying a much larger plane with all the giants qualities (stability, great look, easy access to the plane guts).

This model is extremely precise and predictable; every maneuver is graceful just like the full size Edge.We also offer you best value for your money – the Edge include the most comprehensive heavy duty hardware pack so you don’t need to add any hardware to it.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

The Electric Shock is a real ARF and can be built in a couple of hours. The hinges are pre-installed and we even sealed the hinges gap for you! The wings are attached with two bolts and nuts and the fin is already pre-installed. The only assembly stage left for you is to glue the stab in place and attach the rudder. Install your motor and radio gear and you are all set. We have put a lot of time into the design and testing of the Electric Shock. Special attention was given to the proper geometry of the linkages, so no adjustments are required. In order to achieve the best performance we have tested every possible CG for this plane. We have worked out the most suitable gear, per our specs, and CG requirement, and we offer you a few combo packages that would save you having to experiment and assuring you get the most out of the aircraft. The Electric Shock is designed to be flown in a very small space, any cricket field, parking lot or even your backyard will do. It is available in three see-through colour schemes (green, red and purple) so a few can be flown at the same field without confusion.

Click Here for More Information On the Product

With over 18 months invested in the design, the Katana MD™ is the first model to be built using the new and revolutionary building technique – PA FiberFusion™. FiberFusion™ is a method of combining carbon fiber, balsa and ply in a way never seen before, utilizing the strengths of the fibers within each raw material, with the end result being lighter, stronger, more rigid aircraft that fly like nothing else!

For maximum aerodynamics, the aileron design and construction in this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and aligned in the factory. Despite the laborious production of this design we decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.

Click Here for More Information On the Product

With over 18 months invested in the design, the Katana MD™ is the first model to be built using the new and revolutionary building technique – PA FiberFusion™. FiberFusion™ is a method of combining carbon fiber, balsa and ply in a way never seen before, utilizing the strengths of the fibers within each raw material, with the end result being lighter, stronger, more rigid aircraft that fly like nothing else!

For maximum aerodynamics, the aileron design and construction in this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and aligned in the factory. Despite the laborious production of this design we decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.

Click Here for More Information On the Product

With over 18 months invested in the design, the Katana MD™ is the first model to be built using the new and revolutionary building technique – PA FiberFusion™. FiberFusion™ is a method of combining carbon fiber, balsa and ply in a way never seen before, utilizing the strengths of the fibers within each raw material, with the end result being lighter, stronger, more rigid aircraft that fly like nothing else!

For maximum aerodynamics, the aileron design and construction in this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and aligned in the factory. Despite the laborious production of this design we decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.

Click Here for More Information On the Product

With over 18 months invested in the design, the Katana MD™ is the first model to be built using the new and revolutionary building technique – PA FiberFusion™. FiberFusion™ is a method of combining carbon fiber, balsa and ply in a way never seen before, utilizing the strengths of the fibers within each raw material, with the end result being lighter, stronger, more rigid aircraft that fly like nothing else!

For maximum aerodynamics, the aileron design and construction in this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and aligned in the factory. Despite the laborious production of this design we decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.

Click Here for More Information On the Product

The Katana Mini is an exciting flying machine. Its clever design is capable of any 3D maneuver you ask of it but gentle enough for relaxing flying around in the neighbourhood.
Advanced building technology and finest grades materials provide a structure that is extremely lightweight and strong. The extensive use of carbon fiber throughout the model not only looks great but adds to the model strength.
Two-piece removable wings with a CF wing tube make the Katana Mini a compact, durable, and easily transportable package. This is simply the coolest bird on the market!
The Katana Mini is a true ARF - most of the work is done for you by skilled builders. It is very easy to assemble and includes a complete hardware package so you'll be in the air in no time!
Motor mounting made easy:
Two mounting options: stick mounting and firewall cage mounting. There are two offsets built-in complete with thrust line compensation for both mounting options. All laser cut motor mounts make for a clean install of various motor packages, including enough space and clearance for inline gear motors and outrunners.

Click Here for More Information On the Product

The Katana Mini is an exciting flying machine. Its clever design is capable of any 3D maneuver you ask of it but gentle enough for relaxing flying around in the neighbourhood.
Advanced building technology and finest grades materials provide a structure that is extremely lightweight and strong. The extensive use of carbon fiber throughout the model not only looks great but adds to the model strength.
Two-piece removable wings with a CF wing tube make the Katana Mini a compact, durable, and easily transportable package. This is simply the coolest bird on the market!
The Katana Mini is a true ARF - most of the work is done for you by skilled builders. It is very easy to assemble and includes a complete hardware package so you'll be in the air in no time!
Motor mounting made easy:
Two mounting options: stick mounting and firewall cage mounting. There are two offsets built-in complete with thrust line compensation for both mounting options. All laser cut motor mounts make for a clean install of various motor packages, including enough space and clearance for inline gear motors and outrunners.

Click Here for More Information On the Product

The Katana Mini is an exciting flying machine. Its clever design is capable of any 3D maneuver you ask of it but gentle enough for relaxing flying around in the neighbourhood.
Advanced building technology and finest grades materials provide a structure that is extremely lightweight and strong. The extensive use of carbon fiber throughout the model not only looks great but adds to the model strength.
Two-piece removable wings with a CF wing tube make the Katana Mini a compact, durable, and easily transportable package. This is simply the coolest bird on the market!
The Katana Mini is a true ARF - most of the work is done for you by skilled builders. It is very easy to assemble and includes a complete hardware package so you'll be in the air in no time!
Motor mounting made easy:
Two mounting options: stick mounting and firewall cage mounting. There are two offsets built-in complete with thrust line compensation for both mounting options. All laser cut motor mounts make for a clean install of various motor packages, including enough space and clearance for inline gear motors and outrunners.

Click Here for More Information On the Product

The Katana Mini is an exciting flying machine. Its clever design is capable of any 3D maneuver you ask of it but gentle enough for relaxing flying around in the neighbourhood.
Advanced building technology and finest grades materials provide a structure that is extremely lightweight and strong. The extensive use of carbon fiber throughout the model not only looks great but adds to the model strength.
Two-piece removable wings with a CF wing tube make the Katana Mini a compact, durable, and easily transportable package. This is simply the coolest bird on the market!
The Katana Mini is a true ARF - most of the work is done for you by skilled builders. It is very easy to assemble and includes a complete hardware package so you'll be in the air in no time!
Motor mounting made easy:
Two mounting options: stick mounting and firewall cage mounting. There are two offsets built-in complete with thrust line compensation for both mounting options. All laser cut motor mounts make for a clean install of various motor packages, including enough space and clearance for inline gear motors and outrunners.

Click Here for More Information On the Product

With quality, performance and design as the true inspiration behind our latest innovation, we proudly introduce the Inspire Mini Parkflyer ARF. Just like it's big brother, this aircraft is lightweight while offering a very robust and solid construction.

A two piece removable main wing, joined with a carbon wing tube conveniently aids in transportation and durability. Expect highly aerobatic, unlimited 3D performance with excellent slow speed stability and improved structural integrity. Takeoffs are also smooth and the plane floats in for landings.
The build itself is very fast and straightforward, as a true 95% pre-built ARF should be.

Click Here for More Information On the Product

Ali Machinchy flying the AJ Extra at a local jet event!
When Fliton sat down with the 2005 XFC champion Andrew Jesky, He was adamant about making the absolute best large scale parkflyer available in todays market. After many design changes and 3 prototypes later, Fliton would proudly unveil the
Andrew Jesky Extra 330S... the ultimate in professional grade.

The overall build is very straightforward and can be assembled in as little as a few hours. An interlocking joint structure and special covering also makes for a very strong construction

Click Here for More Information On the Product

When Fliton sat down with the 2005 XFC champion Andrew Jesky, He was adamant about making the absolute best large scale parkflyer available in todays market. After many design changes and 3 prototypes later, Fliton would proudly unveil the
Andrew Jesky Extra 330S... the ultimate in professional grade.

The overall build is very straightforward and can be assembled in as little as a few hours. An interlocking joint structure and special covering also makes for a very strong construction

Click Here for More Information On the Product

When Fliton sat down with the 2005 XFC champion Andrew Jesky, He was adamant about making the absolute best large scale parkflyer available in todays market. After many design changes and 3 prototypes later, Fliton would proudly unveil the
Andrew Jesky Extra 330S... the ultimate in professional grade.

The overall build is very straightforward and can be assembled in as little as a few hours. An interlocking joint structure and special covering also makes for a very strong construction

Click Here for More Information On the Product

Fliton Extra represents the pinnacle of modern high quality ARTF freestyle aerobatic design. From the precise laser cut high grade balsa wood components, to the lightweight fibreglass cowling and wheel spats this model just oozes quality.
Covered in a stunning multi coloured metallic Oracover (Profilm) scheme, the Extra is a display of skilled craftsmanship and attention to detail.

Even the fittings are a step above all other ARTF models. Supplied as standard with high grade aluminium undercarriage, pre-painted to the fuselage colour. Also included are lightweight anodised aluminium control horns and breathtakingly light carbon wing spar. Items that are normally considered as upgrade options for many kits come as standard with the Fliton Extra.

Click Here for More Information On the Product

Fliton Extra represents the pinnacle of modern high quality ARTF freestyle aerobatic design. From the precise laser cut high grade balsa wood components, to the lightweight fibreglass cowling and wheel spats this model just oozes quality.
Covered in a stunning multi coloured metallic Oracover (Profilm) scheme, the Extra is a display of skilled craftsmanship and attention to detail.

Even the fittings are a step above all other ARTF models. Supplied as standard with high grade aluminium undercarriage, pre-painted to the fuselage colour. Also included are lightweight anodised aluminium control horns and breathtakingly light carbon wing spar. Items that are normally considered as upgrade options for many kits come as standard with the Fliton Extra.

Click Here for More Information On the Product

Fliton proudly introduces the new Inspire 60 Acro (Hybrid) ARF, perhaps our best performing product to date. The Inspire 60 demonstrates unique precision and 3D flying qualities that are often discussed about, but rarely delivered by any single airplane. The Inspire exhibits rock-solid precision flying, extremely straight lines with instantaneous snap-roll recovery and full or fractional snaps upon stick release.

By moving to high rates, the Inspire is a 3D demon with completely steady upright and inverted harriers, stable controllable hovers aided by the large, full length ailerons, and laser-straight knife edge performance. Thanks in part to the huge rudder, experience plenty of reserve power on the backside of knife edge loops without any adverse coupling. Most planes require different prop and CG setups for optimal 3D and precision, while the Inspire does it all with its stock setup.

Click Here for More Information On the Product

Fliton proudly introduces the new Inspire 60 Acro (Hybrid) ARF, perhaps our best performing product to date. The Inspire 60 demonstrates unique precision and 3D flying qualities that are often discussed about, but rarely delivered by any single airplane. The Inspire exhibits rock-solid precision flying, extremely straight lines with instantaneous snap-roll recovery and full or fractional snaps upon stick release.

By moving to high rates, the Inspire is a 3D demon with completely steady upright and inverted harriers, stable controllable hovers aided by the large, full length ailerons, and laser-straight knife edge performance. Thanks in part to the huge rudder, experience plenty of reserve power on the backside of knife edge loops without any adverse coupling. Most planes require different prop and CG setups for optimal 3D and precision, while the Inspire does it all with its stock setup.

Click Here for More Information On the Product

The new Mini Edge 540 offers the same mind blowing performance as the larger glow powered freestyle, but in a smaller package.

Once again this model adheres to Fliton’s usual standard of first class workmanship. Amazingly accurate laser cutting and high grade balsa make this model strong and light. While Profilm covering and a stunning, intricate colour scheme applied to perfecting standards makes this a model you can be proud to own.

The Mini Extra flies more like a plane twice it’s size. It tracks amazingly well and can perform slow graceful aerobatics on low rates. A quick flick to high rates enables you to perform blenders, flicks, snaps, avalanches and of course the repertoire of 3D flight. Just the right blend between scale outline and good flying model proportions, the Mini Edge 540 is sure to impress all those that see it fly.

Click Here for More Information On the Product

The new Mini Edge 540 offers the same mind blowing performance as the larger glow powered freestyle, but in a smaller package.

Once again this model adheres to Fliton’s usual standard of first class workmanship. Amazingly accurate laser cutting and high grade balsa make this model strong and light. While Profilm covering and a stunning, intricate colour scheme applied to perfecting standards makes this a model you can be proud to own.

The Mini Extra flies more like a plane twice it’s size. It tracks amazingly well and can perform slow graceful aerobatics on low rates. A quick flick to high rates enables you to perform blenders, flicks, snaps, avalanches and of course the repertoire of 3D flight. Just the right blend between scale outline and good flying model proportions, the Mini Edge 540 is sure to impress all those that see it fly.

Click Here for More Information On the Product

Smaller brother to the already acclaimed Fliton Extra 330 Freestyle, the new Mini Extra 330 offers the same mind blowing performance as the larger glow powered freestyle, but in a smaller package.

Once again this model adheres to Fliton’s usual standard of first class workmanship. Amazingly accurate laser cutting and high grade balsa make this model strong and light. While Profilm covering and a stunning, intricate colour scheme applied to perfecting standards makes this a model you can be proud to own.

The Mini Extra flies more like a plane twice it’s size. It tracks amazingly well and can perform slow graceful aerobatics on low rates. While a quick flick to high rates enables you to perform blenders, flicks, snaps, avalanches and of course the repertoire of 3D flight . Just the right blend between scale outline and good flying model proportions, the mini extra is sure to impress all those that see it fly.

Click Here for More Information On the Product

Smaller brother to the already acclaimed Fliton Extra 330 Freestyle, the new Mini Extra 330 offers the same mind blowing performance as the larger glow powered freestyle, but in a smaller package.

Once again this model adheres to Fliton’s usual standard of first class workmanship. Amazingly accurate laser cutting and high grade balsa make this model strong and light. While Profilm covering and a stunning, intricate colour scheme applied to perfecting standards makes this a model you can be proud to own.

The Mini Extra flies more like a plane twice it’s size. It tracks amazingly well and can perform slow graceful aerobatics on low rates. While a quick flick to high rates enables you to perform blenders, flicks, snaps, avalanches and of course the repertoire of 3D flight . Just the right blend between scale outline and good flying model proportions, the mini extra is sure to impress all those that see it fly.

Click Here for More Information On the Product

With quality, performance and design as the true inspiration behind our latest innovation, we proudly introduce the Inspire Mini Parkflyer ARF. Just like it's big brother, this aircraft is lightweight while offering a very robust and solid construction.

A two piece removable main wing, joined with a carbon wing tube conveniently aids in transportation and durability. Expect highly aerobatic, unlimited 3D performance with excellent slow speed stability and improved structural integrity. Takeoffs are also smooth and the plane floats in for landings.
The build itself is very fast and straightforward, as a true 95% pre-built ARF should be.

Click Here for More Information On the Product

Fliton proudly introduces our highly acclaimed Rogue 3D Bipe, an airplane in a class of its own. The performance highly compliments the sleek aggressive look. Lightweight, durable and beautiful... the Rogue encompasses many awesome features!
This meticulously designed and engineered ARF offers precision manoeuvring capabilities for the field as well as large indoor environments. Mobility is also easier than ever with it's detachable wing design.

Click Here for More Information On the Product